Illuminated pool with a wooden edge at sunset

Pool blog

Pools, Useful tips

Pool pump hours: how long to run the filtration each day and how to set a timer

Pool care: a man puts a robotic cleaner into the water, alongside the daily pool pump hours

Short answer: pool pump hours are normally 6–8 hours a day, and more on very hot days. The whole volume of water should pass through the filter in 3–6 hours, and ideally in 4 hours. You work out the time of one cycle by dividing the pool volume by the pump flow. Then a timer switches the pump on and off for you.

Pool care: a man puts a robotic cleaner into the water, alongside the daily pool pump hours
A man puts the robotic cleaner into the pool water.

Pool pump hours a day: how many your pool needs

Short answer: the pump normally runs 6–8 hours a day, and more on very hot days. Do not confuse this with the time of one cycle, in which the whole volume passes through the filter in 3–6 hours.

So it helps to keep the two numbers apart. The cycle time shows how fast the filter cleans the volume once. The hours a day show how long the pump works during the day. In our article on mistakes with a prefabricated pool, filtering only 2–3 hours a day is a mistake, because bacteria and algae grow within hours. As a result, weak filtration gives cloudy or green water, whatever chemical treatment you use.

How to work out your pool pump hours from volume and flow

Short answer: divide the pool volume by the pump flow in m³/h. The result is the time of one cycle, and it should be between 3 and 6 hours.

For example, a 6 × 3 m pool with an average depth of 1.5 m holds 27 m³. With a 6 m³/h pump, the sum is 27 ÷ 6 = 4.5 hours per cycle. To choose the equipment for your size, read our guide on which filtration system you need. In addition, the table shows the same sum for our sets.

SetFlowPool up toVolume ÷ flow
Swing Plus 4 m³/h4 m³/h15 m³3.75 hours
Swing Plus 6 m³/h6 m³/h30 m³5 hours
Azuro 6 m³/h6 m³/h35 m³5.83 hours
Azuro 9 m³/h9 m³/h55 m³6.11 hours
Azuro 11 m³/h11 m³/h65 m³5.91 hours

The sums use the largest volume that the manufacturer states for each set. So with a smaller pool the cycle is shorter. With the Azuro 9 m³/h, the sum for 55 m³ comes out a little above 6 hours, which is at the edge of the range.

In addition, the flow on the product sheet is the maximum. According to our guide to sizing the pool equipment, a 21 m³/h pump connected to a filter with less than 75 kg of sand does not deliver even half of the stated flow. So with a weak filter the cycle takes longer.

Pool pump hours in summer and in hot weather

Short answer: in summer the filtration should run at least 6–8 hours a day and, in very hot weather, even more. However, our sources give no table of hours for each degree, so we do not invent one.

First, heat and sun load the water. Then, with heat and sun, chlorine is used up much faster. Also, according to the sheet of the Blue Connect GO analyser, warmer water reduces the effect of chlorine and helps microorganisms grow. So on such days, run the filtration longer.

In contrast, we give no hours for winter, because our sources do not set them. To prepare the filter for the cold, read the article on the sand filter in winter.

Day or night: when to run the filtration

Short answer: the product sheets set no time of day. What counts is the total number of hours, and that the filtration is running when you add products.

On the other hand, Real Decreto 742/2013 gives no number of hours either. In its Annex I, the recirculation time is the one set by the specifications and needs of the pool, so that it meets the quality parameters.

Three facts help you choose. First, pH products are poured in with the filtration running. Second, shock chlorine is added at dusk, when the sun is gone. Finally, according to our article on monthly costs, the schedule should avoid short, repeated starts. So set long periods, not many short ones. The electricity for the pump and filtration comes to 10–26 € a month, depending on the pump power, the price of electricity and the schedule.

Pool pump timer: which options there are

Short answer: you control the pump with a built-in timer, a plug-in timer, a digital timer or a control panel with a timer. All of them switch the pump on and off at the set hours. The frequency inverter does not switch it on, but it regulates its speed.

TimerHow it worksPrice
Swing Plus 4 and 6 m³/h setsbuilt-in timer; power of 190 W and 250 Wfrom 176.22 €
24 h timer plugmechanical; shortest interval of 15 minutes; up to 16 A and 3200 W; IP20, for dry places onlyfrom 9.50 €
Digital outdoor timerweekly programme of up to 8 events; shortest interval of 1 minute; up to 16 A and 3600 W; IP44; the memory keeps the programme if the power is cutfrom 20.80 €
Control panel with timer and remote, 13 A / 50 W1 timer for the pump on a set schedule; 13 A protectionfrom 625.00 €
iSaver Rapid X20 frequency inverterregulates the pump speed; energy savings of up to 80 %from 583.00 €

What to check before buying a timer

Prices include VAT and are from 18/11/2026; they may change. So before you buy a timer, compare the pump power with its limit. Our sets have powers from 190 W (Swing Plus 4 m³/h) to 690 W (Azuro 11 m³/h). With the control panel with a timer, also check that the 13 A protection suits your pump.

On the other hand, the timer switches the pump on by itself. So check that the pump has water, because it must not run dry. You will find pumps, sets and panels in the categories of filter pumps, sand filter kits and control panels. For the positions of the filter valve, see the article on multiport valve positions.

Frequently asked questions about pool pump hours

How many hours a day should the pool pump run?

Normally 6–8 hours a day, and more on very hot days. The whole volume should pass through the filter in 3–6 hours.

How many hours should you filter the pool in summer?

At least 6–8 hours a day, and even more in hot weather. Filtering 2–3 hours a day is not enough.

Should you run the pump by day or by night?

The product sheets set no time of day. Set long periods and check that the filtration runs when you pour in pH products.

How do you set a timer for the pool pump?

With a timer: the one built into the Swing Plus sets, a plug-in timer, a digital outdoor timer or a control panel with a timer. Set long periods, not short starts.

How many hours should you filter in winter?

We give no hours for winter, because our sources do not set them. Preparing the filter is explained in another article.

You will find everything for filtration in our Acuático pool shop.