Illuminated pool with a wooden edge at sunset

Pool blog

Pools, Useful tips

Sand filter valve positions: what each one does

Sand filter valve positions: a compact sand filter with a red lever and a pressure gauge

Short answer: the multiport valve of a sand filter has six main positions: filter, backwash, rinse, waste, recirculate and closed. With a single lever you choose where the water goes. Some models add a middle "winter" position, and the Azuro and Swing Plus sets add a solar panel position. Below you will see what each of the sand filter valve positions does according to the manufacturers, and how to wash the filter.

Sand filter valve positions: a compact sand filter with a red lever and a pressure gauge
A sand filter with a top-mounted multiport valve and a pressure gauge.

What the multiport valve of a sand filter does

The valve controls how the sand filter works. So, with one turn of the lever you decide how the filtration runs, without changing pipes or closing separate taps. The valve sits on top of the tank, with a clamp, or on the side. The sand filter valve positions change the path of the water inside the filter.

The sand filter valve positions and what each one does

The names of the positions are similar across models. The table collects the descriptions from the pages of the Emaux and Atlas Pool valves and of the Azuro and Swing Plus sets.

PositionWhat it does
Filterthe normal mode; the pump pushes the water through the sand
Backwashcleans the sand with a reverse flow
Rinseafter the backwash, it flushes the dirt out of the valve (Emaux) or settles the sand (Swing Plus, Atlas)
Wastethe water bypasses the filter and goes to the drain
Recirculatethe water returns to the pool without passing through the filter
Closedstops the flow to the filter and the pool
Solar paneloperation with a solar panel (Azuro and Swing Plus)
Wintera middle position for the cold season (Azuro 9 m³/h, Swing Plus, Atlas)

In some listings you will see a "7-way valve". On the Emaux 9 filter these are the six functions plus the middle winter position. To prepare the filter for the cold, read our article on the sand filter in winter.

How to backwash and rinse the filter

The order below comes from the manual of the Azuro sets for the first start-up. You change the lever only with the pump off, and at least half a minute after stopping it, so that the sand and the debris can settle.

  1. Switch the pump off and connect a hose to the valve outlet marked WASTE.
  2. Turn the lever to BACKWASH and switch the pump on. During the first wash the dirt comes out for 1–3 minutes, until the water runs clear.
  3. Switch the pump off, turn the lever to RINSE and switch the pump on for 10–20 seconds.
  4. Switch the pump off, turn the lever to FILTER and switch it on again.

However, the product pages give no fixed duration for the regular wash. So follow the manual of your filter. With clean sand, note the pressure on the gauge: if it rises by 0.2 bar, it is time to wash. In addition, the Atlas side-mount valve has a sight glass that lets you see the water during the backwash, so you know when the filter is clean. The installation of the whole set is explained in our article on how to install a sand filter.

When to use recirculate and waste

The recirculate position moves the water without filtering it. Atlas Pool describes it as moving the water without filtration. The waste position is for taking water out of the pool. By contrast, on the Emaux the water goes straight to the drain, and you use it for the vacuum to drain or to lower the level. Do not change position while the pump is running. The manufacturer warns that equipment working under pressure, such as suction robotic cleaners, is very sensitive to changes in water pressure.

What a valve costs and how to choose one

To choose well, consider the type of mounting and the size of the connections on your filter. Before ordering, compare the old valve with the photos and the dimensions. The Emaux MPV01 valve is a top-mounted valve for Emaux filters of the V and P series, with 1½″ connections. It works up to 4 bar with a flow of 17 m³/h, and it is the valve only, without unions or a gauge. The Atlas side-mount selector valve is for Atlas Pool filters of the matching size, works up to 3 bar and has a locking key and a sight glass. The Atlas top valve of 50 mm – 1½″ is for filters with D 50 connections.

ValveMountingPositionsFrom
Emaux MPV01 1½″top689.00 €
Atlas side-mountside6 + winter114.40 €
Atlas top 50 mm – 1½″topfilter, wash, rinse and others117.00 €
Swing Plus 2 m³/h settop6 + winter135.77 €
Azuro 9 m³/h settop6 + winter796.00 €

Prices as of 18/11/2026, subject to change. A qualified technician should fit the valve, with the pump disconnected and the pressure in the filter released. The valves are in the valves and parts category and the complete filters are in filter tanks. If you want a set with a pump, see the sand filter kits.

Frequently asked questions about sand filter valve positions

What are the positions of the multiport valve?

There are six main ones: filter, backwash, rinse, waste, recirculate and closed. Some models add a middle winter position and a solar panel position.

What does each position of the filter valve do?

Filter is the normal mode and backwash cleans the sand. Rinse ends the wash, waste sends the water to the drain, recirculate returns it unfiltered and closed stops the flow.

How do I backwash and rinse the filter?

With the pump off, turn the lever to BACKWASH and switch the pump on. Then, again with the pump off, turn to RINSE for 10–20 seconds and finally to FILTER.

What is the recirculate position for?

It returns the water to the pool without passing it through the filter. Waste is different: it sends the water to the drain, to lower the level or to use the vacuum to drain.

Can I change position while the pump is running?

No. Switch the pump off and wait at least half a minute. The valves are in the valves and parts category. To choose the filter, read cartridge or sand filter and which sand filter you need for your pool size. Everything is in our Acuático pool shop.