Pool blog
Automatic pool filling: REGUL Niveau and Bulleur water level controllers

Automatic pool filling works through a level controller: a probe watches the water, and a solenoid valve tops it up only when the level drops. Acuático has two REGUL units: the Niveau for pools with a skimmer, from €504.00, and the Bulleur for overflow pools, from €1,162.00, as of 19/11/2026. Below you will see how they work, which pool each one suits and what they cannot do.

How automatic pool filling works
Short answer: the level controller watches the water with a probe. When the level drops, it opens a solenoid valve that tops the pool up until the level returns. This makes up for evaporation and for the water lost when you wash the filter.
According to the REGUL Niveau product page, the probe sits in the skimmer and keeps the chosen height, with an adjustment range of 40 mm. When the level drops, the controller sends a command to the solenoid valve. The filling lasts only as long as needed, and then the system stops it by itself. In addition, according to the manufacturer's manual, in normal operation the Niveau tops up for 5 minutes, pauses for 1 minute and checks the level again.
The manual adds an important point: the Niveau is for keeping the level, not for filling the pool. Only for the first filling is there a one-off filling function up to the probe, and you set the water level before start-up. So the controller maintains the level, but it does not replace the initial filling.
Pool water level controller for a skimmer pool: REGUL Niveau
Short answer: the REGUL Niveau is for pools with a skimmer and for spas, and it costs €504.00. Its safeguards stop the filling if it lasts too long, if there is a leak or if there is a fault.
The probe detects the water without electrical contact with it. Also, the time safeguard is programmable: in pool mode, the maximum filling time is 1, 2 or 4 hours, and in spa mode it is 5, 10 or 15 minutes. If the water does not reach the probe within the set time, the system stops the filling and a warning light comes on. That may point to a leak, a probe problem or another fault.
Spa mode is for small volumes, under 5 m³, and it has no frost protection. Pool mode, however, does have it: below 3 °C the Niveau forces the filtration, and at 5 °C it stops it. This function reduces the risk of freezing, but it does not replace proper winterising.
Overflow pool: REGUL Bulleur and the balance tank
Short answer: the REGUL Bulleur is for overflow pools. It measures the level of the balance tank to within a centimetre through an air tube, with no float or probe in the water, and it costs €1,162.00.
In an overflow pool, the water runs over the grilles and collects in a balance tank. The article on the overflow pool and the skimmer explains how the system works. You install the Bulleur in the technical room and link it to the tank with an air tube. In addition, its LCD screen shows the water height in the tank, the actions in progress and the estimated water consumption. It also has a safeguard against unusually long filling, which limits the risk of an uncontrolled water supply.
According to the manual, the sensor measures a water height of up to 2.50 m, and the measuring rod is made of 3 PVC tubes of Ø 20 mm and 42 cm in length. The unit has 5 levels that you can set separately to within a centimetre, and a rain delay of up to 3 hours. For safety, the filling stops below the level of 5 cm. Finally, start the Bulleur when the pool is full and the tank is at its ideal level.
Niveau or Bulleur: which level controller to choose
Short answer: for a pool with a skimmer, choose the Niveau; for an overflow pool with a balance tank, the Bulleur. The Bulleur page states that for skimmer pools and spas the right model is the Niveau.
| Detail | REGUL Niveau | REGUL Bulleur |
|---|---|---|
| Type of pool | with a skimmer, and spas | overflow |
| Where it measures | probe in the skimmer | balance tank, through an air tube |
| Accuracy | adjustment within a range of 40 mm | to within one centimetre |
| Safeguards | filling time of 1, 2 or 4 hours; frost protection below 3 °C | safeguard against long filling; rain delay of up to 3 hours |
| Power and protection | 10 W, IP65 | 10 W, IP65 |
| Price | from €504.00 | from €1,162.00 |
What to check before buying a level controller
Short answer: check the type of pool, what the kit includes and who will connect it. We recommend that a plumber connects every level controller.
According to the Niveau page, the NIV003 kit includes the solenoid valve. So, before you order, check exactly what the kit contains. Also, both units run on 240 V ~. The article on sizing pool equipment explains how to size skimmers, the pump and the pipework. You will find more solutions for the water in the filtration and treatment category, and the parts of an overflow pool in the overflow systems.
Frequently asked questions about automatic pool filling
How does automatic pool filling work?
A probe watches the level and, when it drops, a solenoid valve opens and tops up the water. Then the filling stops by itself. In the Niveau, the probe goes in the skimmer and the adjustment range is 40 mm.
Which level controller should I choose?
For a pool with a skimmer and for a spa, the Niveau, at €504.00. For an overflow pool with a balance tank, the Bulleur, at €1,162.00.
What happens if there is a leak with automatic filling?
The Niveau stops the filling if the water does not reach the probe within the set time: 1, 2 or 4 hours in pool mode. Then it shows a warning of a possible leak.
Can automatic filling fill the pool?
No. According to the manual, the Niveau does not do that job. Only for the first filling is there a one-off filling function.
Do I need a balance tank for automatic filling?
In an overflow pool, yes: the water collects in the tank and the Bulleur measures its level with an air tube. In a pool with a skimmer, you do not need a tank.
In short, choose by pool type: the Niveau for a skimmer and the Bulleur for an overflow. Everything for your pool water is in our pool and garden shop Acuático. Prices are as of 19/11/2026 and may change.
