Illuminated pool with a wooden edge at sunset

Pool blog

Pools, Useful tips

Overflow pool or skimmer: how the overflow system, the grille and the balance tank work

Rectangular in-ground pool with a tiled terrace, a type of overflow pool or skimmer pool depending on the system you choose
Rectangular in-ground pool with a tiled terrace, a type of overflow pool or skimmer pool depending on the system you choose
A rectangular in-ground pool with a terrace of ceramic tiles.

Short answer: in an overflow pool, the water spills over the edge into a channel around the pool and returns to the balance tank and the filter. The skimmer is the simpler solution: it takes the surface water through an opening in the wall. The overflow system is more professional, but it is also considerably more expensive to build and to maintain.

Here you will see how an overflow pool works, how it differs from a pool with a skimmer, which grille and coping you choose and why you need a balance tank. The data comes from the product sheets at Acuático and from other articles on our blog.

What an overflow pool is and how it works

Short answer: an overflow pool lets the water spill over the edge into a channel around the perimeter. From there it returns to the balance tank and the filter. Therefore the surface always looks full to the brim.

The path of the water is simple. First, the water spills over the edge and falls into the channel, under the grille. Then the channel carries it to the balance tank. Finally, the pump draws it from there and sends it to the filter. The tank is needed to hold the volume of water that is displaced when people get into the pool.

So the overflow system has four parts: the coping with a channel, the grille, the balance tank and the connection to the filtration. All the elements are in the overflow systems category.

Overflow pool or skimmer: the differences

Short answer: choose the overflow system if you want the water level with the edge and many people will use the pool at the same time. Choose a skimmer if you want simpler and cheaper construction or if the pool is a removable one.

AspectSkimmerOverflow pool
Where the water is collectedin an opening (skimmer) in the pool wallin a channel around the whole perimeter, under a grille
Where the pump draws fromfrom the surface, through the skimmerfrom the balance tank
Additional partbasket for leaves and insectsbalance tank
Price and upkeepcheaper and simplermore expensive to build and to maintain
Where it fits bestpools with glass mosaic or a liner, removable and inflatable poolspublic pools and pools with many swimmers at once
Main part, price fromABS Standard skimmer: 50.27 €Small coping: 72.94 € each, without grille or tank

Prices include VAT and are from 18/11/2026; they may change. To learn more about skimmers, read the article on the pool skimmer. How many you need is explained in the guide to sizing the pool equipment. For a more general comparison, see the article on pool equipment.

Overflow grille for the pool: types, widths and corners

Short answer: the grille covers the channel. You choose it by material and width: polypropylene with UV protection, reconstituted stone or teak.

GrilleMaterialSizesPrice from
Singlepolypropylene with UV protectionwidths of 14.5, 19.5 and 24.5 cm, 8 mm slot9.45 € per metre
Doublepolypropylene with UV protectionwidths of 19.5, 24.5 and 30 cm, 8 mm slot12.15 € per metre
Stone Standardreconstituted stonestraight grille of 50 × 24.9 cm, 4 cm thick, 9 kg55.36 € each
TeakAfrican Iroko teakwidths of 20 and 25 cm32.64 € per metre

The Single grille meets the TS EN 13451-1 standard and carries a load of 138 kg. It is fitted with an L-shaped angle profile of 24 × 26 mm and 2 m in length, which costs 2.03 € per metre. For the bends there are corners of 90° and 45°, from 9.45 € each. All the models are in the polypropylene overflow grilles category.

Coping and channel of the pool overflow: which height to choose

Short answer: the coping forms the channel. A taller, deeper channel collects more water, and a lower one fits narrow edges.

CopingPieceHeightWeightPrice from
Small49.5 cm21.5 cm–72.94 €
Spiaggia50 cm16 cm33.5 kg75.22 €
Standard100 cm18.5 cm84 kg90.84 €
Laguna (hidden overflow)100 cm13 cm80 kg123.20 €
Alto50 cm40 cm78.5 kg110.14 €
Styrolight 2 (lightweight)100 cm20 cm10 kg189.64 €

The Standard has a rounded end towards the paving. The Senza Toro is 14.5 cm high and has a flat end, for a more even spill. In the Laguna hidden overflow there is no grille: the channel is covered by a stone edge on supports, and the water spills underneath it.

Each coping comes in straight, end, corner and curved pieces. The version with a pipe hole (63, 82, 100 or 125 mm) is for the connection to the tank. The pieces rest on the pool wall and are levelled very precisely: the edge over which the water spills must be at the same height all around the perimeter. Clean the channel regularly: lift the grilles and wash the tanks. In addition, do not use a high-pressure washer, harsh chemicals or de-icing salt.

Balance tank and level control

Short answer: in an overflow pool the tank is essential, because it collects the water that spills over. Automatic control helps to keep its level stable.

The Acuático catalogue does not include the tank itself, but it does include the REGUL Bulleur, an automatic control of its level, for 1,162.00 €. It measures the level to within a centimetre through an air tube, with no probe, float or metal rod in the water. In addition, it watches the filling and protects against overfilling and unnecessary water use. The LCD screen shows the level, the actions in progress and the estimated consumption. The unit is fitted in the technical room and has IP65 protection.

When to choose an overflow pool and when a skimmer

Short answer: the overflow system is for pools with many swimmers and for water level with the edge. The skimmer is for simpler and cheaper pools.

  • Overflow: for a public pool or one that many people use at the same time. For a more modern look, without a visible grille, there is a hidden overflow: Laguna or Canalbord (60 cm, 26.5 cm, 63 kg, from 195.60 €), in which the pool edge is the channel itself.
  • Skimmer: for pools with glass mosaic or a liner. For removable and inflatable pools you use a hanging skimmer or a pump with a skimmer, not a wall skimmer.
  • Building from scratch: the stages from the design to filling are in the guide on how to build a pool.

Frequently asked questions about the overflow pool

What is an overflow pool?

It is a pool whose water spills over the edge into a channel around the perimeter. From there it returns to the balance tank and the filter.

Overflow pool or skimmer pool?

The overflow system is more professional, but more expensive to build and to maintain. The skimmer is simpler and cheaper.

What is the overflow grille for?

It covers the channel. The polypropylene Single carries a load of 138 kg and costs from 9.45 € per metre.

What is the balance tank, or compensation tank?

It is the tank that collects the water from the channel and the volume that swimmers displace. The pump draws the water from there.

You will find overflow elements and everything for your pool in our pool shop Acuático.