Illuminated pool with a wooden edge at sunset

Pool blog

Pools, Useful tips

Pool pH level: the right value and how to correct it

Clean in-ground pool with clear water and a balanced pool pH level

The pool pH level is the first thing to check before you add any product. The Azuro labels give an optimum pH of 7.2 – 7.6, and Spanish Royal Decree 742/2013 allows 7.2 – 8.0 in public pools. Therefore, this guide brings together the values, the doses and the steps to correct it, each with its source.

Clean in-ground pool with clear water and a balanced pool pH level
With the pool pH level in range, the water stays clear.

What pH should a pool have

The pool pH level should be between 7.2 and 7.6, according to the Azuro pH Plus and Azuro pH Minus labels. In public pools, Royal Decree 742/2013 (Annex I) allows 7.2 – 8.0 and requires closing the pool below 6.0 or above 9.0. For private family pools, the decree only requires what its article 13 says (incident situations).

SourcepHWhat it means
Azuro pH Plus and pH Minus label7.2 – 7.6optimum for swimming, chlorine works effectively
Royal Decree 742/2013, Annex I7.2 – 8.0range allowed in public pools
Royal Decree 742/2013, Annex Ibelow 6.0 or above 9.0the pool is closed until the value returns to normal

The two references do not contradict each other. The decree sets the allowed range, while the label gives the narrower interval in which chlorine works effectively.

How often to test the pool pH level

First, test the pH at least 2 times a week, and always before you add a chlorine product. This is what the Azuro labels state. In public pools, the decree requires a test at least 1 time a day, in the morning before opening (Annex III).

According to the maker of the test strips, values change faster with heavy use, high temperatures, strong sun, rain or after you add products. So on those days, test more often.

For example, to test, use a water tester. The drop tester for chlorine and pH is enough for 120 tests, and the 3 in 1 test strips come in packs of 50. The Quick Check 4 in 1 strips give a result in 15 seconds, and it is best to check them against a drop tester every 2 weeks.

How to raise the pool pH level

To raise the pH, use Azuro pH Plus when the value is below 7.2. According to the label, 10 g per 1 m³ of water raise the pH by about 0.2. If the water is softer, however, you need a little more.

  1. Measure the pH with a tester.
  2. Work out the dose from the pool volume. If you do not know it, see how to calculate the volume of a pool.
  3. Then dissolve the product well in a plastic bucket of water and pour it in slowly next to the water inlet, with the filtration running.
  4. Once it has mixed completely, measure again and repeat if necessary. Until then, nobody should swim.

How to lower the pool pH level

To lower the pH, use Azuro pH Minus when the value is above 7.6. According to the label, 15 g per 1 m³ of water lower the pH by about 0.2. If the water is harder, you need a larger dose. Also, the steps are the same as with pH Plus: add the product in portions and measure once it has fully dissolved.

Water volumepH Plus (+0.2 pH)pH Minus (−0.2 pH)
1 m³10 g15 g
5 m³50 g75 g
10 m³100 g150 g
20 m³200 g300 g
30 m³300 g450 g
50 m³500 g750 g

The values are approximate and correspond to a change of about 0.2. All the pH regulators are in a single category.

Why the pool pH level rises or falls

The pH leaves its range when conditions in the pool change. The labels do not list every cause, so testing is the only reliable answer.

  • Low pH (below 7.0): risk of corrosion of metal parts, discoloured materials and irritated eyes and skin.
  • High pH (above 7.4): milky cloudiness, weaker chlorine action and a chlorine smell. Above 7.6, use pH Minus.

If the water is already cloudy or green, correct the pH first and the chlorine afterwards.

Frequently asked questions about the pool pH level

What pH should a pool have?

Between 7.2 and 7.6 according to the Azuro labels. The decree allows 7.2 – 8.0 in public pools.

How do you lower the pH of a pool?

With Azuro pH Minus when the pH is above 7.6: 15 g per 1 m³ of water lower the pH by about 0.2.

How do you raise the pH of a pool?

With Azuro pH Plus when the pH is below 7.2: 10 g per 1 m³ of water raise the pH by about 0.2.

Why does the pH rise or fall?

Also, changes are faster with heavy use, heat, strong sun, rain and after you add products. Testing shows which way the value is heading.

How often should you test the pH?

At least 2 times a week and before every chlorine product. In public pools, at least 1 time a day.

You will find pH regulators, testers and chlorine products in our Acuático pool shop, and the chlorine products are in the disinfection category.