Pool blog
How to test pool chlorine and pH: strips, drops, tablets or a digital meter

Short answer: to test pool chlorine and pH, you use strips, drops, tablets or an electronic meter. By cost per test, the cheapest are drops (0.12 €) and strips (0.15 €). Electronic meters watch pH and ORP, but free chlorine is not among their parameters. Test at least 2 times a week and before each chlorine product.

How to test pool chlorine and pH step by step
Short answer: with a strip, dip it, wait 15 seconds and compare the colours with the chart. With drops and tablets, follow the instructions of the kit.
You use the Azuro Quick Check 4 in 1 strips like this:
- Dip the strip in the water and take it out at once.
- Hold the strip flat for 15 seconds.
- Compare the colours of free chlorine, pH, alkalinity and stability, in this order, with the colour chart.
You read the values at exactly 15 seconds. Do not compare the result if the strips have been out longer. The sheets of the drop tester and the tablets give no steps, but ask you to read the instructions carefully before use. The tablet kit has phenol red for pH, DPD1 for free chlorine and DPD3 for total chlorine. According to the sheet, total chlorine is usually a weak indicator. So you control chlorine mainly with the DPD1 tablets.
Strips, drops, tablets or a digital meter: which to choose
Short answer: for the daily check, strips are the quickest. For a more precise check, choose drops or tablets. The electronic meter watches the water by itself, but it does not replace testing the chlorine.
| Method | What it measures | Tests | Cost per test | Price |
|---|---|---|---|---|
| 3 in 1 strips | pH, free chlorine, bromine and total hardness; read against the colour scale | 50 | 0.15 € | from 7.49 € |
| Azuro Quick Check 4 in 1 | free chlorine 0–5 mg/l, pH 6.2–8.2, alkalinity and stability; 15 seconds | 50 | 0.17 € | from 8.64 € |
| Tablet tester for Cl and pH | pH, free chlorine and total chlorine | 20 | 0.38 € | from 7.62 € |
| Drop tester for chlorine and pH | active chlorine and pH | 120 | 0.12 € | from 13.80 € |
| Drop tester for pH and O2 | active oxygen 0–50 mg/l and pH 6.2–8.5, for chlorine-free disinfection | 2 × 120 | – | from 19.38 € |
| Aiper HydroComm Pro | pH, ORP, EC, TDS and temperature; a check every hour | continuous | – | from 429.00 € |
Prices include VAT and are from 18/11/2026; they may change. The cost per test is the price divided by the number of tests. So the 3 in 1 strips give 7.49 ÷ 50 = 0.15 €. Tablets cost more per test, but the refill blisters cost 1.48 € for 10 tablets.
Photometer and electronic meters
On 18/11/2026 there is no photometer in our catalogue, so we give no data on that device. There are two electronic meters. The Aiper HydroComm Pro measures every hour, with a pH accuracy of up to ±0.2 and an ORP accuracy of up to ±30 mV. The Blue Connect GO measures pH, temperature and ORP twice a day, but on 18/11/2026 it is out of stock. Both help you watch the water. According to the Blue Connect GO sheet, the device does not fully replace good maintenance.
Free chlorine is not among the parameters of these devices. According to Real Decreto 742/2013 (Annex I), you measure redox of 250 to 900 mV when the disinfectant is not chlorine or bromine. So with chlorine, test free chlorine with strips, drops or tablets. These products are in the water testers category.
How often to test pool chlorine and pH
Short answer: at least 2 times a week and before each chlorine product. With heavy use, heat, strong sun, rain or after adding products, test more often.
The sheets of the testers say so. In addition, you check the Quick Check strips every 2 weeks against a drop tester, to get more reliable values. Also, the drop kit expires 2 years after the manufacturing date, which is on the pack. In public pools, Real Decreto 742/2013 requires pH and residual disinfectant to be checked at least 1 time a day, in the morning before opening (Annex III). The kits for those checks must meet the UNE-ISO 17381 standard, and our sheets do not mention that standard.
Which values to look for when you test
Short answer: according to the Azuro labels, pH is between 7.2 and 7.6 and free chlorine between 0.3 and 0.5 mg/l. Real Decreto 742/2013 allows 7.2–8.0 for pH and 0.5–2.0 mg/l for free chlorine in public pools.
To correct the values, read the articles on pool pH and on pool chlorine. If the water is already cloudy, also see cloudy pool water. The correction products are in the categories of pool chemicals and disinfection.
Frequently asked questions about testing chlorine and pH
How do you test pool chlorine?
With strips, drops or tablets. With the Quick Check strip, dip it, wait 15 seconds and compare the colours with the chart.
Are pool test strips reliable?
They give a quick result, but Quick Check recommends checking them every 2 weeks against a drop tester.
Is there a digital meter for chlorine and pH?
There are electronic meters for pH, ORP and temperature, such as the Aiper HydroComm Pro. Free chlorine is not among the parameters they measure.
How often should you test the pool water?
At least 2 times a week and before each chlorine product, and more often with heavy use, heat or rain.
Which is cheaper: strips or drops?
Drops cost 0.12 € per test and the 3 in 1 strips cost 0.15 €.
You will find testers and pool chemicals in our Acuático pool shop.
