Poolsana - Germany

POOLSANA PLUS 400/Pump 100 sand filter system – 8 m³/h, for pools of up to 40 m³

€314.48 VAT incl.

Ready-to-use sand filter system for pools of up to about 40 m³: ∅ 400 mm filter tank and Pump 100 self-priming pump.

  • Flow rate of about 8 m³/h at 550 W
  • 7-way valve with pressure gauge
  • Pump with TÜV and GS
  • Base and connection hose included in the kit
+3 144 points in “Endless Summer” +1 000 bonus points on the second online purchase · terms

Frequently bought together

€314.48 VAT incl.
From €34.99
From €7.99
Total for selected:
Description
Sand filter system

POOLSANA PLUS 400/Pump 100 sand filter system – 8 m³/h, for pools of up to 40 m³

The POOLSANA PLUS 400 Pump 100 sand filter is a ready-to-use sand filter system with a self-priming pump.

The Poolsana PLUS 400/Pump 100 sand filter system is a ready-to-use set for pools of up to about 40 m³. It combines a ∅ 400 mm filter tank with a Pump 100 self-priming pump. The pump delivers about 8 m³/h at 550 W.

Series: PLUSFilter tank diameter: 400 mmPump: Poolsana Pump 100
Poolsana PLUS 400/Pump 100 sand filter system with pump
Poolsana PLUS 400/Pump 100 sand filter system with pump
Technical data
ManufacturerPoolsana
SeriesPLUS
Filter tank diameter400 mm
PumpPoolsana Pump 100
Flow rateabout 8 m³/h
Pump power550 W / 230 V
Recommended pool volumeup to 40 m³
Valve7-way with sight glass and pressure gauge
Max. tank pressure1.5 bar

Filter tank with strong walls

The tank is polypropylene and withstands a pressure of up to 1.5 bar. The finish is high quality, and the tank has an embossed Made in Germany inscription. The system is practical for above-ground pools.

What the PLUS 400/Pump 100 sand filter system includes

  1. ∅ 400 mm filter tank with central tube and drainage section;
  2. 7-way valve with sight glass;
  3. pressure gauge;
  4. hose connectors ∅ 32/38 mm;
  5. connection hose between the pump and the valve;
  6. PTFE (teflon) tape;
  7. sturdy, compact base;
  8. Pump 100 with strainer and a cable with plug.

The filter medium is not included. You need about 50 kg of sand (grain size 0.4–0.8 mm), about 40 kg of filter glass or about 700 g of Fibalon (3D or rope).

Seven-way valve

The seven-way valve has the following positions: filtration (normal operation and vacuuming the floor), backwash, rinse after backwash, waste, recirculation without filtration, closed and winter position. The valve and pump ports have a 1 1/2″ female thread.

Poolsana Pump 100 pump

Poolsana Pump 100 is a compact and reliable self-priming pump. TÜV tested it and it bears the GS mark. It has a strainer, a drain inlet and a cable with a factory-fitted plug.

The pump may be above the water level, but no more than 50 cm. Before the first start-up, fill the strainer with water. It is not suitable for pools with salt electrolysis.

  • Max. head: 10 m
  • Max. flow rate: 158 l/min
  • Power supply: 230 V, 50 Hz
  • Power input: 550 W
  • Speed: 2 900 rpm
  • Protection: IP X5
  • Noise: 60 dB at 1 m
  • Cable: 1.5 m
  • Max. water temperature: 35 °C

Connection and installation of the PLUS 400/Pump 100 sand filter system

The system suits ∅ 32/38 mm hose. With rigid ∅ 50 mm pipes, you need adapters separately. The water in the filter must not exceed 40 °C. You assemble the system on site.

Poolsana PLUS 400 filter tank – embossed Made in Germany inscriptionDrain plug of the PLUS 400 filter tankSeven-way valve with position ringPressure gauge of the seven-way valveSight glass of the valvePoolsana Pump 100 self-priming pumpPump 100 rating plate (SPS100)

Not sure this is the right part for you?

Send us the model of your appliance and a photo of the old part. We will check compatibility before you place your order.

Technical data
About Poolsana - Germany
Delivery and warranty

Free online diagnosis

Problems with your pool water?

Green or cloudy water, or a smell of chlorine? In about a minute you will know the cause and receive a plan with the exact doses for your volume.