Poolsana - Germany

Poolsana PLUS built-in skimmer for German steel pools (Poolsana) – white or grey, with or without return inlet

From €34.99 – €46.99 VAT incl.

Poolsana PLUS built-in skimmer for German steel pools (Poolsana), white or grey, with or without a return inlet for 32/38 mm hose.

  • For round, figure-eight and oval steel pools
  • 1½″ female thread, 32/38 mm socket included
  • Basket, flap, suction plate and cover with flange
up to +469 points in “Endless Summer” +1 000 bonus points on the second online purchase · terms

Frequently bought together

From €34.99
From €7.99
Total for selected:
Description
Skimmers and inlets · Poolsana PLUS pool skimmer

Poolsana PLUS built-in skimmer for German steel pools (Poolsana) – white or grey, with or without return inlet

The Poolsana PLUS built-in pool skimmer is for German steel pools (Poolsana) and for above-ground pools of any type. It suits round, figure-eight and oval pools. It consists of ABS plastic that resists impacts and pressure, and it is very easy to install.

Use: For German steel pools (Poolsana) and above-ground poolsMaterial: Impact-resistant ABS plasticConnection: 1½″ female thread
White Poolsana PLUS built-in skimmer with flange, suction plate and socket
White PLUS skimmer without return inlet
Technical data
ManufacturerPoolsana
Intended useFor German steel pools (Poolsana) and above-ground pools
MaterialImpact-resistant ABS plastic
Connection1½″ female thread
IncludedSocket 1½″ female thread × 32/38 mm, suction plate, liner flange and cover plate
ColoursWhite and grey
Return inlet (variant)For 32/38 mm hose, 60 mm hole in the wall

What the Poolsana PLUS built-in skimmer does

The skimmer is a built-in element that connects to the sand filter or to the pool pump. It draws in the water surface and retains leaves and other dirt. You can also safely add chlorine tablets through the skimmer basket. Adding chemicals directly to the pool carries the risk of bleaching the liner.

  1. Skimmer basket – filters out coarse dirt
  2. Skimmer flap – closes the opening when the pump is off
  3. Suction plate for connecting an automatic or manual pool cleaner
  4. Liner flange with a double seal and a skimmer cover plate that hides the flange

Connection and variants of the Poolsana PLUS built-in skimmer

The skimmer has a 1½″ female thread. The set includes a 1½″ male thread × 32/38 mm socket. As a result, it is ready to connect with a hose. With rigid pipe, for example Ø 50 mm, you need an additional transition, which you buy separately.

It is available in white and in grey. The variant with a return inlet adds an inlet that returns the water cleaned by the filter to the pool. It comes with seals and a socket for a Ø 32/38 mm hose. The recommended opening in the steel wall is 60 mm.

Installation and maintenance

In Poolsana steel pools, the wall normally already has the cut-outs for the skimmer and the inlets. You install the skimmer slightly below the top edge of the pool.

The water fills it to about two thirds of its height. The skimmer flap regulates suction with the pump on and lets fine particles from the surface enter the skimmer.

When to clean the skimmer

The Poolsana PLUS built-in skimmer retains coarse dirt. That is why the pump's strainer basket needs cleaning less often.

Always remove the suction plate when no cleaning equipment is connected. As a result, the skimmer draws water correctly from the surface. Check the basket regularly during the season. Then the pump runs without overload and the water stays clean.

White Poolsana PLUS built-in skimmer with return inlet for hoseGrey Poolsana PLUS built-in skimmer with flange, suction plate and socketGrey Poolsana PLUS built-in skimmer with return inlet for hoseDrawing with the dimensions of the PLUS skimmer opening

Not sure this is the right part for you?

Send us the model of your appliance and a photo of the old part. We will check compatibility before you place your order.

Technical data
About Poolsana - Germany
Delivery and warranty