Illuminated pool with a wooden edge at sunset

Pool blog

Pools, Useful tips

Polystyrene pool: how it is built with EPS blocks and what it includes

Polystyrene pool: a cut-away of the wall showing the EPS blocks and the reinforcement

Short answer: you build a polystyrene pool with formwork blocks of expanded polystyrene (EPS), which you reinforce and fill with concrete on a slab. The wall is light and keeps the heat of the water. Our catalogue has two types: NewStyle with equipment, from 6,260 €, and the rectangular Poolsana Linea pools, from 4,130 €. The price does not include installation. Below you will see the stages of the work, the contents of the pack and what you must buy separately.

Polystyrene pool: a cut-away of the wall showing the EPS blocks and the reinforcement
An EPS block pool seen in section, with polystyrene walls and reinforcement.

What a polystyrene pool is and what its advantages are

The EPS blocks form a light formwork that you fill with concrete. The wall is insulated and the water keeps its temperature better. According to the shop category, an EPS pool loses less heat through the walls than concrete alone. The PS30 blocks have a density of 30 kg/m³ and come from Austria. In addition, they are light, so the walls go up quickly. Likewise, the openings for the skimmer, the nozzles and the lights are easy to cut. The combined 80/30 block has an inner layer of about 1 cm with a density of 80 kg/m³, so the walls are more solid and insulate even better.

How much a polystyrene pool costs

The price depends on the line and the size. Compare both tables. On the one hand, the Poolsana Linea packs are for self-assembly. On the other hand, the models in the EPS thermal pools New Style come with equipment and a choice of lining. Prices as of 18/11/2026, subject to change.

Poolsana Linea, PLUS packEPS blocksFiltrationFrom
5 × 3 m858.5 m³/h4,130 €
6 × 3 m9511.5 m³/h4,450 €
7 × 3.5 m11011.5 m³/h5,060 €
8 × 4 m12514 m³/h5,640 €

All the Linea pools are 1.50 m deep. The PROFI and PROFI High Level packs add a 75 W UV-C unit. For 5 × 3 m they start at 4,470 € and 5,190 €. The NewStyle models come with equipment, and their price is approximate and does not include installation.

NewStyleSizeFiltrationPrice
BOSTON4.00 × 2.50 m5 m³/h6,260 €
COMO6.00 × 3.00 m9 m³/h9,393 €
ONTARRIO7.00 × 3.00 m9 m³/h11,449 €
ROMA8.00 × 4.00 m11 m³/h14,373 €

For a breakdown of the costs, read the article on the price of building a pool.

How a polystyrene pool is built with EPS blocks

The stages follow the Poolsana manual for rectangular pools. The pool is for full burial. If you bury it only partly, consult a construction specialist.

  1. First, dig the pit. The outer dimensions are the inner ones plus 2 × 25 cm for the walls and another 60–70 cm of working space. The depth is 150 cm of pool, 20 cm of slab and 20 cm of base layer, 190 cm in total.
  2. Then pour a 20 cm concrete slab, reinforced with two layers of Q257A mesh. Below it, the manual recommends 15–20 cm of crushed stone with drainage.
  3. Next, lay the blocks and reinforce the walls. Each cell has a vertical 12 mm reinforcing bar, and each course has a double ring of 6 mm bar.
  4. After that, fill the blocks with C25/30 concrete in three layers on all sides. A specialist company pumps the concrete, and you compact it with a rod.
  5. Fix the liner hanging profile, drill 6–8 holes for the condensation and lay the geotextile. This stops the polystyrene from drawing the plasticiser out of the PVC liner.
  6. Hang the liner at a temperature of +15 to +25 °C and not in direct sun. Then connect the skimmer, the nozzles and the filter, and fill the pool.

Finally, the backfill starts when the concrete has dried, after about 3–4 weeks. Do not compact it with a vibrator and do not raise it more than 50 cm above the water level. The general outline of a build is in the article on how to build a pool.

What the pack includes and what you buy separately

The PLUS pack of 5 × 3 m includes 85 blocks of 100 × 25 × 30 cm, a PVC liner, aluminium profiles, a geotextile with spray adhesive, a PRO Next sand filter with a Speck pump, a skimmer, two nozzles, pipes, a V2A ladder, a cleaning kit, Azuro products and an illustrated manual. The price does not include installation. Also, the concrete and the reinforcement are not in the contents, so you buy them separately.

Size20 cm slabConcrete for the walls
5 × 3 mabout 4.5 m³about 3.1 m³
6 × 3 mabout 5.5 m³about 3.5 m³
7 × 3.5 mabout 7 m³about 4 m³
8 × 4 mabout 9 m³about 4.5 m³

The warranty on the wall is 3 years, and on the liner and the other parts it is 2 years. To compare with other systems, see the article on the types of pools. All the models are in the concrete pools category.

Frequently asked questions about the polystyrene pool

What is a pool made of polystyrene blocks?

It is a pool with walls of formwork blocks of expanded polystyrene (EPS), which you reinforce and fill with concrete. The wall is insulating and light.

How much does an EPS block pool cost?

The Poolsana Linea 5 × 3 m PLUS starts at 4,130 € and the NewStyle BOSTON costs 6,260 €. The price does not include installation, and the prices are from 18/11/2026.

How do you build a pool with polystyrene blocks?

You dig, pour a 20 cm slab, lay and reinforce the blocks, fill them with C25/30 concrete, lay the geotextile and the liner and fit the filter.

What advantages does this type of pool have?

The wall is insulated, the water keeps its temperature and the PS30 blocks are light. So it is a good base for a heat pump.

Is installation included in the price?

No. You also buy the concrete and the reinforcement separately. Everything is in our Acuático pool shop.