Poolsana - Germany

Poolsana pool safety transformer 230/12 V – 50 VA or 100 VA for LED lighting

From €99.82 – €119.72 VAT incl.

Short-circuit-proof pool safety transformer that reduces the voltage from 230 V to 12 V. Suitable for LED pool lights, made in Germany.

  • 50 VA for LED lamps of up to 50 W
  • 100 VA for two LED lamps of up to 50 W each
  • 2 m mains cable with plug
up to +1 197 points in “Endless Summer” +1 000 bonus points on the second online purchase · terms

Frequently bought together

From €99.82
Total for selected:
Description
Poolsana pool transformer

Poolsana pool safety transformer 230/12 V – 50 VA or 100 VA for LED lighting

The Poolsana pool safety transformer reduces the voltage from 230 V to 12 V and powers LED lighting safely. It is short-circuit-proof and made in Germany. It is available in two variants: 50 VA and 100 VA.

Input / output: 230 V / 12 V, 50/60 HzMains cable: 2 m with plugShort-circuit protection: Yes
Safety transformer 50 VA 230/12 V with mains cable and plug
Transformer 50 VA
Technical data
ManufacturerPoolsana
Input / output230 V / 12 V, 50/60 Hz
Mains cable2 m with plug
Short-circuit protectionYes
OriginMade in Germany
Protection rating (50 VA)IP 65
Thermal cut-out (50 VA)110 °C
Dimensions (50 VA)170 × 131 × 81 mm

Which Poolsana pool safety transformer to choose

The 50 VA variant is suitable for LED lamps with a total power of up to 50 W. The 100 VA variant is for two LED lamps of up to 50 W each. Before choosing, add up the power of all the lights you are going to connect. This way you get an adequate supply without overloading.

  • Input and output: 230 V / 12 V, 50/60 Hz
  • Short-circuit-proof
  • Mains cable with plug, 2 m long
  • Secondary side: PG cable gland and terminals on the housing

Technical data of the 50 VA model

The protection rating is IP 65 and the thermal switch is set to 110 °C. The dimensions are 170 × 131 × 81 mm.

The 100 VA model has a 2 m mains cable with plug fitted at the factory. The output side has a PG cable gland on the housing and terminals on the transformer. This makes connecting the two lights simple.

Installation and use

The transformer is installed outside the pool and connected to the light junction box. Sets with Poolsana Compact and Profi lights include this transformer. For individual lights, you must add a suitable transformer separately.

Sets with one Compact light come with a 50 VA transformer and those with two lights, a 100 VA one. This way the power always matches the number of lamps in the pool.

The electrical connection must be made by a qualified electrician. Also follow the instructions in the assembly and operating manual.

The transformer is intended to power LED lighting and must not be overloaded with loads more powerful than those stated. Therefore, always check the total power of the connected lamps.

Safety transformer 100 VA 230/12 V with two cable entries and plug

Questions about choosing or installing?

Write or call us: we will help you choose the right model for your pool.

Technical data
About Poolsana - Germany
Delivery and warranty