Hexagonal glass-ceramic mosaic Ustica

€37.30 / m² VAT incl.

Hexagonal glass-ceramic mosaic Ustica – hexagonal tiles, violet blue with a pearly sheen. Non-porous, colourfast glass.

  • Silicone-dot backing for firm adhesion
  • Suitable for: pools, hot tubs, spa areas, bathrooms and showers
  • Mesh sheet: 300 × 290 mm, 13 per 1 m²
  • Full box only: 1 m²
  • Delivery: up to 20 working days
+373 points in “Endless Summer” +1 000 bonus points on the second online purchase · terms
Description
Hexagonal glass-ceramic mosaic Ustica for pools

Hexagonal glass-ceramic mosaic Ustica

The pool mosaic Ustica is a glass-ceramic mosaic that combines hexagonal tiles and a colour that does not fade – violet blue with a pearly sheen. As a result, the mosaic stays intense and shiny for years.

Violet blue hexagons with a pearly sheen in which indigo is mixed with pink and golden glints. The pieces look like gemstones. In the water, in the sun, the colour lights up in a deep, radiant purple-blue tone. Suitable for bold pools with an artistic character.

Hexagonal tilesThickness 5.5 mmSilicone dot backingCode MOSFBZH307
Hexagonal glass-ceramic mosaic for pools Ustica – violet blue with a pearly sheen, 300 × 290 mm mesh sheet
Hexagonal glass-ceramic mosaic for pools Ustica – violet blue with a pearly sheen, 300 × 290 mm mesh sheet
Technical data
Shape
hexagon
Base
silicone dots (polyurethane)
Material
glass-ceramic (100% recycled glass)
Colour
violet blue with a mother-of-pearl sheen
Thickness
5,5 mm
Mesh sheet size
300 × 290 mm
Mesh sheets per 1 m²
13
Seal
2 mm
Water absorption
up to 0.04% (EN ISO 10545-3)
Flexural strength
55 N/mm²
Frost resistance
yes (ASTM C1026)
Chemical resistance
class A (ASTM C650)
Suitable for permanent immersion
yes
Suitable for
pools, hot tubs, spa areas, bathrooms and showers
Quantity per box
1 m²
Price per
1 m²
Delivery time
up to 20 working days
Code
MOSFBZH307
Hexagonal glass-ceramic mosaic for pools Ustica – pool filled with water and lined with the mosaic
Hexagonal glass-ceramic mosaic for pools Ustica – pool filled with water and lined with the mosaic
In the water

What the pool mosaic Ustica looks like in a pool filled with water

With water the mosaic becomes more intense: the upper strip above the water shows the true colours of the mesh sheet, while towards the bottom the shade deepens and shines in the sun.

Dark grey grout deepens the colour, while white grout outlines the honeycomb.

Advantages

Advantages of the hexagonal glass-ceramic mosaic Ustica

Non-porous glassWater absorption of up to 0.04%: it does not go mouldy and does not hold stains or odours.
For permanent immersionSuitable for pools, hot tubs, fountains and overflow channels.
Colour that lasts for yearsIt does not fade in the sun (ISO 4892) or with chemicals (class A according to ASTM C650).
Frost-resistantIt withstands freeze-thaw cycles (ASTM C1026), so it is also suitable for outdoor use.
DurableFlexural strength 55 N/mm² (EN ISO 10545-4), smooth surface without defects.
Silicone-dot backingFirmer adhesion than net and paper, easy installation on curves and corners.
Eco-friendly100% recycled glass, with no pigments containing lead, cadmium or heavy metals.
Silicone-dot backing of a glass-ceramic mosaic – the back of the mesh sheet
Silicone-dot backing – firmer adhesion than net and paper
Silicone-dot backing

Firmer than net and paper

The Ustica mosaic mesh sheets have a silicone-dot backing (polyurethane). On the back, small silicone dots hold the tiles together but do not cover their reverse side.

This leaves more than 95% of the surface of each tile free for the adhesive, so the adhesion is very firm. In addition, the backing does not change the thickness of the mosaic, does not dissolve in the adhesive or grout and does not warp during storage.

The mesh sheet is also flexible, so it fits easily on curved walls, steps and corners.

PropertySilicone dotsNetPaper
Surface free for the adhesivemore than 95% of the backless: the mesh covers part of the backthe whole back, but the paper is on the front
Visibility during installationthe tiles and joints are visiblethe tiles are visiblethe tiles are hidden under the paper
Installation on curves and cornersvery easy: flexible mesh sheeteasydifficult: the paper tears
After installationnothing has to be removednothing has to be removedthe paper soaks through and peels off
Application

Where to use the hexagonal glass-ceramic mosaic Ustica

  • Accent walls in bathrooms and spas
  • Lining of pools and hot tubs
  • Kitchen splashback
  • Decorative niches and columns
Seal

Grout colour

Dark grey grout deepens the colour, while white grout outlines the honeycomb.

For a pool, use epoxy grout because it is watertight, chlorine does not affect it and it keeps its colour.

Calculator

Mosaic, adhesive and grout calculator for the pool Ustica

First, calculate the area of the floor and walls and add a cutting allowance. For example, take an 8 × 4 m pool with a depth of 1.5 m:

–mosaic with allowance, m²
–boxes of 1 m²
–mosaic price
–C2TE S1 adhesive
–grout

Consumption figures are indicative: adhesive, about 2 kg/m² for tiles up to 25 mm, 2.5 kg/m² for 40 mm and 3 kg/m² for larger tiles; grout, according to the formula (A + B) / (A × B) × C × D × 1.6 kg/m² for tiles of about 3 cm, 5.5 mm thickness and 2 mm grout joint.

However, actual consumption depends on the flatness and absorbency of the substrate, the type of adhesive and grout, the size of the notched trowel, the width and depth of the joint, the shape of the pool or room and the installer's experience. Therefore, check the quantity against the technical data sheet of the chosen adhesive and grout and with the installer.

Assembly

How to install the hexagonal glass-ceramic mosaic Ustica

  1. Substrate. It must be level (to within 2 mm over 2 m), dry, firm and free of dust. In a pool, first apply an elastic cement-based waterproofing compound to the substrate.
  2. Adhesive. Use a white elastic cement-based adhesive of class C2TE S1. White is important because glass is slightly transparent and a grey adhesive would darken the colour.
  3. Application. Next, with a notched trowel (3–4 mm), spread the adhesive over an area for 2–3 mesh sheets.
  4. Laying. Then place the mesh sheet and press it down evenly with a rubber float. Also leave the same 2 mm joint between the mesh sheets.
  5. Cutting. In corners and around the jets, cut the silicone dots with a utility knife. For loose tiles, instead, use glass mosaic nippers.
  6. Grouting. Grout after 24 hours. For a pool, use epoxy grout because it is watertight and chlorine does not affect it.
  7. Cleaning. Remove grout residue with a damp sponge before it dries. Remove epoxy residue immediately, however, with a special cleaning product.
  8. Filling. Finally, fill the pool once the grout has hardened completely (usually after 7 days).
Elastic waterproofing for poolsWhite adhesive C2TE S1Epoxy or waterproof grout3–4 mm notched trowel and rubber floatUtility knife and glass mosaic nippersSponge, bucket and clean water
Quality

Tests according to international standards

TestResultStandard
Water absorptionup to 0.04%EN ISO 10545-3
Flexural strength55 N/mm²EN ISO 10545-4
Surface quality100% free of defectsEN ISO 10545-2
Chemical resistanceclass A: no changeASTM C650
Freezing and thawingwithstandsASTM C1026
UV ageingno changeISO 4892
Thermal expansionwithstandsEN ISO 10545
Maintenance

Maintenance of the hexagonal glass-ceramic mosaic Ustica

  • First, clean with a soft cloth or a sponge and a neutral cleaning product.
  • Also, avoid abrasive powders, metal brushes and acids on the grout.
  • Keep the water pH at 7.0–7.4 and an appropriate hardness so that limescale does not build up in the joints.
  • In addition, clean the waterline regularly with a sponge and a waterline cleaning product.
Order

Order and delivery

  • The price is per 1 m².
  • However, the pool mosaic Ustica is sold in multiples of one box (1 m²).
  • Delivery time: up to 20 working days.
  • Order the whole quantity at once – with a 5–10% reserve – so that it comes from the same batch and has the same shade.
Questions

Frequently asked questions about the pool mosaic Ustica

What adhesive should I use to install the Ustica mosaic?
A white elastic cement-based adhesive of class C2TE S1. This is because white adhesive keeps the exact colour of the glass.
Which grout should I choose?
For a pool: epoxy grout. Dark grey grout deepens the colour, while white grout outlines the honeycomb.
Can I order less than a box?
No: the mosaic is sold by the full box only (1 m²). Order the whole quantity at once so that it comes from the same batch.
How long does delivery take?
Up to 20 working days. The mosaic is ordered specially for you and then arrives in boxes.
Is it suitable for salt water and chlorine?
Yes, because glass does not react with chlorine or with the salt in the pool and does not change colour.
Can it be installed over old tiles?
Yes, if the old tiles are firm, clean and degreased and are treated with a suitable primer. In a pool, however, we recommend new waterproofing.

Colour in the photo and in reality

Glass mosaic is a living material and its colour is perceived differently depending on the conditions. As a result, there may be differences between the colour in the photos and visualisations and the colour of the mosaic on site. The following have an influence:

  • the settings, brightness and type of screen of the monitor, phone or tablet;
  • the light: sun, overcast sky, artificial lighting, the colour of the lamps, morning or afternoon;
  • the angle from which you look: glass reflects and shines differently;
  • the pool water: depth, clarity, chemicals and the reflection of the sky make the colour more intense and bluer;
  • the colour of the grout and adhesive and the size of the covered surface;
  • the colours around the mosaic: coping, paving, walls, plants;
  • the production batch: a slight difference in shade is possible between different batches; that is why you should order the whole quantity at once;
  • the natural difference between individual tiles in mixes and in glass with an effect finish.

Visualisations of pools and interiors are for guidance only and serve solely as a reference. If colour is important to you, please contact us before ordering.

How much mosaic do you need?

Send us the dimensions of the pool or room, and then we will calculate the square metres and the number of boxes before you place your order.

Technical data
About Acuático
Delivery and warranty