
Decking joists and composite decking
Decking joists and boards: the warmth of wood without upkeep
Decking joists are the hidden frame that holds a warm wood-look pool terrace together. Our DECKER system includes boards, battens, clips and finishing profiles to build the complete floor.
- Wood look, with no varnishing
- Complete system: boards, battens and clips
- Three colours: Anthracite, Nut Coffee and Wheat
What the decking joists system includes
To build a lasting terrace you need several parts that work together.
Composite boards
DECKER D100 and D201 profiles measure 140 × 26 × 3000 mm. They come in Wheat, Nut Coffee and Anthracite, with a grooved surface or Emboss wood relief.
Support battens
The DECKER DP110 batten, 45 × 30 × 3000 mm in Anthracite, forms the load-bearing frame under the boards and keeps them level.
Mounting clips
The DK210 clip fixes each board to the batten without visible screws. There is also a start and finish clip to hold the first and last board.
L-shaped finishing profiles
The D400 and D401 profiles finish the visible edges. There is also a 40 × 60 × 3000 mm profile for steps and fronts, with a clean, neat look.
How to choose your decking joists and boards
Therefore, these steps will help you plan your purchase.
- Choose the finishThe grooved surface has a calmer look. The Emboss relief, on the other hand, imitates the grain of wood. Therefore, decide according to the style of your garden.
- Select the colourFor example, Anthracite adds a modern contrast, Nut Coffee a warm brown and Wheat a light tone. Also, match it with the stone and walls around it.
- Calculate the partsThird, measure the surface of your terrace and add decking joists, clips and finishing profiles. This way you avoid unexpected cuts. Finally, keep a few spare pieces.
- Build the frameInstall the joists first and then fix the boards with the clips. This way the floor stays firm, level and without visible screws.
Advantages of composite decking for a pool
WPC combines wood fibres and plastic. For that reason composite decking does not rot or need varnish, unlike natural wood. Its decking joists stay stable under the boards.
In addition, decking joists and boards give a floor that feels pleasant to touch and suits the vegetation, the stone and the outdoor furniture. It is also suitable for terraces, bathing areas, steps and paths.
If you want other boards in this material, see our category of composite decking.
Fitting tip
With decking joists, always combine boards, battens and clips from the same system. This way they fit perfectly. In addition, a finishing profile protects the visible edges and gives a professional finish.
Frequently asked questions about decking joists
What is WPC?
It is a composite material that mixes wood fibres and polymers. It has the look of wood, but it does not rot or need varnish, so it is convenient outdoors.
What is the difference between Emboss and grooved?
The Emboss version reproduces the relief of wood for a more natural look. The grooved one has parallel lines and a calmer design. Both are fitted with the same system.
Do I need decking joists to install it?
Yes. The joists form the load-bearing frame under the boards. Our system uses the DP110 model, which combines with the DK210 mounting clips.
How do I finish the edges?
Use the L-shaped finishing profiles. They cover the visible end sections and the fronts of steps, and come in the same colours as the boards.
Can I combine the decking with other materials?
Of course. It works well beside stone paving, edges and coping. This way you get a coherent pool surround.
Build your terrace beside the pool
Choose boards, battens and clips from the same system and complete the surround with stone and edges.
Showing all 12 results
WPC decking board DECKER – Wheat, grooved surface, 140×26×3000 mm
DECKER D100 Wheat is a WPC decking profile with a characteristic grooved surface and a light wheat shade, intended for building outdoor flooring around pools, terraces, patios and other open spaces.
- Size: 140 × 26 × 3000 mm
- Surface: grooved
- Colour: Wheat
- Material: WPC – wood-polymer composite
- Application: outdoor decking flooring
- Unit of sale: 1 whole profile of 3 m in length
Important: the support profile, mounting clips and finishing elements are sold separately and are chosen according to the particular project.
WPC decking board DECKER D100 – Nut Coffee, grooved surface, 140×26×3000 mm
- WPC decking board DECKER D100 in Nut Coffee colour with a grooved surface
- Size: 140×26×3000 mm
- Suitable for: terraces, patios, gardens and areas around the pool
- A practical choice for easy maintenance and a complete exterior finish
- Compatible with: support profile DP110, mounting clip DK210, start/finish clip DK210 and finishing profile D400
WPC decking board DECKER D201 Anthracite – Emboss relief, 140×26×3000 mm
DECKER D201 Anthracite is a WPC decking profile with an Emboss wood relief for outdoor flooring, measuring 140 × 26 × 3000 mm.
- Colour: Anthracite
- Application: terraces, patios, areas around pools
- Compatibility: DP110 support profile, DK210 mounting clips and D401 finishing profile
The support profile, mounting clips and finishing elements are sold separately.
WPC decking board DECKER D201 Nut Coffee – Emboss wood relief, 140×26×3000 mm
DECKER D201 Nut Coffee is a WPC decking profile with an Emboss wood relief for outdoor flooring, measuring 140 × 26 × 3000 mm.
- Colour: Nut Coffee
- Application: terraces, areas around pools
- Use: terraces, yards, verandas, pool surrounds and other outdoor flooring
- Compatibility: DP110 support profile, DK210 mounting clips and D401 finishing profile
The substructure, mounting clips and finishing elements are sold separately.
WPC decking board DECKER D201 Wheat – Emboss relief, 140×26×3000 mm
WPC decking board DECKER D201 Wheat – Emboss relief is a composite decking profile of 140×26×3000 mm, intended for building elegant, durable outdoor flooring. The model has an Emboss wood relief, which creates a more natural look and feel, while the Wheat colour gives a light, warm and elegant finish.
- Size: 140×26×3000 mm
- Surface: 3D relief / Emboss
- Colour: Wheat – a light sand-beige shade
- Application: terraces, areas around pools, patios and gardens
- Installation: with a clip system on a support profile
- Sale: the price is per 1 piece of profile of 3000 mm in length
DECKER D400 L-shaped finishing profile for WPC decking – grooved surface, 140×60×3000 mm
DECKER L Deck D400 is an L-shaped WPC finishing profile with a grooved surface, intended for finishing the visible end sections of the DECKER decking system.
The profile measures 140 × 60 × 3000 mm and is available in three colours: Anthracite, Nut Coffee and Wheat, to match the WPC decking you have chosen.
- Size: 140 × 60 × 3000 mm
- Length: 3000 mm / 3 m
- Surface: grooved
- Colours: Anthracite, Nut Coffee, Wheat
- Type: L-shaped finishing profile
- Manufacturer code: D400
- Unit of sale: 1 whole profile
DECKER D401 L-shaped finishing profile for WPC decking – Emboss wood relief, 140×60×3000 mm
DECKER L Deck Emboss D401 is an L-shaped WPC finishing profile with Emboss wood relief, designed to finish the visible end sections of a DECKER decking system.
The profile measures 140 × 60 × 3000 mm and comes in three colours: Anthracite, Nut Coffee and Wheat. The embossed surface makes it a good visual match for the decking profiles of the D201 Emboss series.
- Size: 140 × 60 × 3000 mm
- Length: 3000 mm / 3 m
- Surface: Emboss
- Colours: Anthracite, Nut Coffee, Wheat
- Type: L-shaped finishing profile
- Manufacturer code: D401
- Unit of sale: 1 whole profile
DECKER L-shaped finishing profile for WPC decking – 40×60×3000 mm
The DECKER 40×60×3000 mm L-shaped finishing profile is designed to finish the visible edges and fronts of WPC decking neatly and attractively. It is suitable for terraces, pool surrounds, steps, paths and other outdoor spaces.
- Size: 40 × 60 × 3000 mm
- Length: 3000 mm / 3 m
- Type: L-shaped finishing profile
- Material: WPC – wood-polymer composite
- Colours: Anthracite, Nut Coffee, Wheat
- Application: for finishing edges, fronts and end sections
- Unit of sale: 1 whole profile of 3 m in length
- Sales unit: 1 whole profile, 3 m long
Important: the profile is a finishing element and does not replace the supporting substructure of the decking system.
DECKER DK210 mounting clip for WPC decking
DECKER Deck Clip DK210 is a mounting clip for fixing WPC decking profiles to the DP110 support structure. The clip is part of the DECKER Deck system and is used when building flooring with D100 and D201 decking profiles.
- Type: mounting clip for WPC decking
- Manufacturer code: DK210
- Finish: Metallic
- System: DECKER Deck
- Unit of sale: 1 pc of mounting clip
- Reference for the system: about 21 mounting elements per 1 m²*
- Guide for the system: about 21 mounting elements per 1 m²
*The quantity shown is indicative for the mounting elements of the decking system. The actual number of Deck Clips and start/finish clips depends on the particular project.
